PRODUCT



VD-ACTO(MagicTrunk)

>

▶ ACTO-I
BlackBox

>

▶ VD-9600WHG/B

>

▶ VD-9500H

>

▶ VD-1600HD

>

▶ VD-9000FHD

>

▶ VD-8000HDS

>

▶ VD-7000W

>

▶ VD-5000W

>

▶ VD-3000

>

▶ VD-1500MG/MB

>

▶ VD-1500G/B

VD-8000HDS

blackbox for cars

blackbox for cars
Warranty service and responsibility scope
  • We shall not be held responsible for damage caused by errors or data loss of this product, as well as any damages or losses derived from the device not operating normally.
    The product is designed to record, store, play and analyze videos caused by impacts and car accidents or as recorded by user’s discretion. However, it is not assured that the product will record video in every instance. Furthermore, under circumstances where the impact is too weak, the vibration sensor may not be able to detect the impact, which induces that the system will be unable to automatically start recording the [Event] file. In such a situation, the urgent save button (SHOT) on the product should be pressed to start recording a video to the [Event] folder.
Caution
  • SD card is the only usable for this product.
  • In case of a lost SD card, please contact your local retail shop to purchase a replacement.
  • If a damaged or a non-authentic SD card is used, the recorded data maybe damaged or will not record and/or replay due to difference in quality.
  • Do not disassemble or remodel this product as it can cause an electric shock.
  • Any malfunctioning after such action will result in the product being unfit for use and void all warranty/service provisions.
  • Consult the retailer for product maintenance and repairs if necessary.
  • Only use adaptors with the appropriate specifications. The use of other adaptors will defect the product and or cause fire.
  • All wiring should be carefully implemented so the cable may not be damaged.
  • When installing the device to your vehicle, follow all the procedures and make sure the mount is secure. Unclean surfaces will weaken the adhesive strength and can damage the product if it drops due to weak adhesion.
  • This product is not waterproof. Do not allow liquids and impurities into the product.
  • Where the product is wired to the power supply of the vehicle directly or if the cigar jack is connected to the power supply while the engine is off, make sure to disconnect the device to prevent battery drain on your vehicle.
  • Do not use chemicals or detergents to clean the device. This can result in malfunctioning of the product.
  • Accumulation of impurities on the camera lens or the window surface near the camera may result in video distortion and reduced clarity of recorded data.
  • Surrounding area of the product should always be kept clean.
  • Excessive tinting on the window may also distort or reduce clarity of recorded data.
  • Recording can be distorted under the condition where brightness suddenly changes like passing through a tunnel, direct sunlight reflection during day time or where only low light is available at night time.
  • If not enough light is available, using additional external lighting may help record better images.
  • In case of slight impact, the product may not be able to create an event file automatically (it is however recorded as a Normal file). In such a case, please use the (SHOT) button to create an event file manually.
  • If you eject the SD card while the product is operating, the recorded data may be damaged.
  • Ensure the main power is completely off and the device is fully powered off (no indicator lights are on) before removing the SD card from the product.
  • Interacting with the product while driving is risky and may cause an accident.
  • Causing an impact on the product during operation can cause defects or fire.
  • Do not keep the product in extreme temperatures or in humid areas. Being under extreme heat in summer days or freezing cold in winter days may result in defection of the product. Also, do not expose the product to direct fire or water.
  • Do not disassemble the product. Incautious disassemble may result in product defect.
  • Keep the SD card in its case when not in use for product. Static electricity or other environmental elements can damage the recorded data.
  • SD cards are an expendable supply. After normal periods of use, partial memory sectors may be damaged and will disable the recording of data. The system installed on the SD card provides an automated checking function. If use of the automatic checking function identifies problems with the SD card then we recommend purchasing a new SD card for recording data.
  • If the SD card is ejected or the system is turned off while recording, copying or deleting data, stored data may be lost or damaged. In a worst case scenario, the SD card may become defective.
  • Manufacturer is not responsible for loss or destruction of stored data caused by actions above.
  • Copy and keep important data on other data storages such as hard disk, CD and portable flash memory.